Showing posts with label uberizer. Show all posts
Showing posts with label uberizer. Show all posts
Thursday, September 28, 2017
Download latest Uberizer v1 7
Download latest Uberizer v1 7
All credits go to HcH from techknow.me forum.
Download Uberizer v1.7 from here, here or here.
The Uberizer aims to support many android devices. Use the Uberizer to:
* connect
* improve
* backup
* control
* debug
* unlock full play store
* mod
* optimize
* personalise
* root
* and more!
Uberizer Quickstart Guide:
Connecting your device to your computer:
To get started using the Uberizer you will need to connect to your computer. This can be done 2 ways:
* Wireless (RECOMMENDED) (REQUIRES ROOT!)
* Wired (Advanced users only) (This method can ROOT devices which arent rooted)
The reason why wireless is recommend is because its easy! Wired installation requires you to install the ADB driver which can sometimes have problems, some devices have wierd ADB ports so you will have problems finding the proper cable for it and some devices dont have ADB ports at all.
** Setting up your device for Wireless Uberizing (RECOMMENDED)
1. Go to the Wireless Menu (w)
2. Enable Wireless ADB using ONE of these options: 2, 4 or 5, whichever is most easy for your situation.
3. If you use an app (4 or 5), start the app on your Android device.
Use option 6 to connect to the given IP in the app.
If you chose option 2, you must find your device IP, go to Settings, About device, Status, to see the IP.
** Setting up your device for Wired Uberizing (Advanced users only)
1. Install ADB drivers (from dir usb_driver) for wired ADB
2. Boot Android, connect device (on the device, the statusbar will display "usb debugging mode is activated")
3. Run this tool, analyse device so this tool can seek info of your device
and will check if your model is supported by mods
NOTE: Your device must have "ADB Debugging" checked in: "Settings Developer options USB debugging (Debug mode when USB is connected)"
* connect
* improve
* backup
* control
* debug
* unlock full play store
* mod
* optimize
* personalise
* root
* and more!
Uberizer Quickstart Guide:
Connecting your device to your computer:
To get started using the Uberizer you will need to connect to your computer. This can be done 2 ways:
* Wireless (RECOMMENDED) (REQUIRES ROOT!)
* Wired (Advanced users only) (This method can ROOT devices which arent rooted)
The reason why wireless is recommend is because its easy! Wired installation requires you to install the ADB driver which can sometimes have problems, some devices have wierd ADB ports so you will have problems finding the proper cable for it and some devices dont have ADB ports at all.
** Setting up your device for Wireless Uberizing (RECOMMENDED)
1. Go to the Wireless Menu (w)
2. Enable Wireless ADB using ONE of these options: 2, 4 or 5, whichever is most easy for your situation.
3. If you use an app (4 or 5), start the app on your Android device.
Use option 6 to connect to the given IP in the app.
If you chose option 2, you must find your device IP, go to Settings, About device, Status, to see the IP.
** Setting up your device for Wired Uberizing (Advanced users only)
1. Install ADB drivers (from dir usb_driver) for wired ADB
2. Boot Android, connect device (on the device, the statusbar will display "usb debugging mode is activated")
3. Run this tool, analyse device so this tool can seek info of your device
and will check if your model is supported by mods
NOTE: Your device must have "ADB Debugging" checked in: "Settings Developer options USB debugging (Debug mode when USB is connected)"
download file now
Thursday, September 7, 2017
Download latest Uberizer v1 8
Download latest Uberizer v1 8
Download Uberizer v1.8 from here, here or here.
The Uberizer aims to support many android devices. Use the Uberizer to:
* connect
* improve
* backup
* control
* debug
* unlock full play store
* mod
* optimize
* personalise
* root
* and more!
Uberizer Quickstart Guide:
Connecting your device to your computer:
To get started using the Uberizer you will need to connect to your computer. This can be done 2 ways:
* Wireless (RECOMMENDED) (REQUIRES ROOT!)
* Wired (Advanced users only) (This method can ROOT devices which arent rooted)
The reason why wireless is recommend is because its easy! Wired installation requires you to install the ADB driver which can sometimes have problems, some devices have wierd ADB ports so you will have problems finding the proper cable for it and some devices dont have ADB ports at all.
** Setting up your device for Wireless Uberizing (RECOMMENDED)
1. Go to the Wireless Menu (w)
2. Enable Wireless ADB using ONE of these options: 2, 4 or 5, whichever is most easy for your situation.
3. If you use an app (4 or 5), start the app on your Android device.
Use option 6 to connect to the given IP in the app.
If you chose option 2, you must find your device IP, go to Settings, About device, Status, to see the IP.
** Setting up your device for Wired Uberizing (Advanced users only)
1. Install ADB drivers (from dir usb_driver) for wired ADB
2. Boot Android, connect device (on the device, the statusbar will display "usb debugging mode is activated")
3. Run this tool, analyse device so this tool can seek info of your device
and will check if your model is supported by mods
NOTE: Your device must have "ADB Debugging" checked in: "Settings Developer options USB debugging (Debug mode when USB is connected)"
* connect
* improve
* backup
* control
* debug
* unlock full play store
* mod
* optimize
* personalise
* root
* and more!
Uberizer Quickstart Guide:
Connecting your device to your computer:
To get started using the Uberizer you will need to connect to your computer. This can be done 2 ways:
* Wireless (RECOMMENDED) (REQUIRES ROOT!)
* Wired (Advanced users only) (This method can ROOT devices which arent rooted)
The reason why wireless is recommend is because its easy! Wired installation requires you to install the ADB driver which can sometimes have problems, some devices have wierd ADB ports so you will have problems finding the proper cable for it and some devices dont have ADB ports at all.
** Setting up your device for Wireless Uberizing (RECOMMENDED)
1. Go to the Wireless Menu (w)
2. Enable Wireless ADB using ONE of these options: 2, 4 or 5, whichever is most easy for your situation.
3. If you use an app (4 or 5), start the app on your Android device.
Use option 6 to connect to the given IP in the app.
If you chose option 2, you must find your device IP, go to Settings, About device, Status, to see the IP.
** Setting up your device for Wired Uberizing (Advanced users only)
1. Install ADB drivers (from dir usb_driver) for wired ADB
2. Boot Android, connect device (on the device, the statusbar will display "usb debugging mode is activated")
3. Run this tool, analyse device so this tool can seek info of your device
and will check if your model is supported by mods
NOTE: Your device must have "ADB Debugging" checked in: "Settings Developer options USB debugging (Debug mode when USB is connected)"
Changelog:
v1.8 (189 functions):
* upgraded google market / play store to 4.4.2.
* fixed recovery flash in the Allwinner recovery procedure
* removed driver preinstallation procedure as it has some problems with some devices
* fixed root check option
* added auto launch of the TechKnow ToolKit on installation
* added various item k/26: scriptexe, takes a .SH file from files_to_sd and executes it!
* added changer_filesCONMOD.sh, a script to change configurations of WM8650s
* added v. MediaManager 1. Add Wireless Device
* added v. MediaManager 2. List online mediaplayers
* added v. MediaManager 3. Sync files_to_sd to all
* added v. MediaManager 4. Play file on mediaplayers
* added v. MediaManager 5. Stop file playback on all
* added v. MediaManager 6. EZ Video Syncmode
* added v. MediaManager 7. EZ Image Syncmode
* added v. MediaManager 8. EZ Audio Syncmode
* added v. MediaManager 9. Deploy APKs to all
* added v. MediaManager 10. Sync date and time
* added v. MediaManager 11. Erase all /sdcard
* added v. MediaManager H. Help
* removed preinstall drivers directory
* rewrote the CWM WRITE procedure for AllWinner
* updated the code to show techknows new domain: www.techknow.me instead of the old www.techknowforum.net
* added i. 13 show/dump device partition information
v1.8 (189 functions):
* upgraded google market / play store to 4.4.2.
* fixed recovery flash in the Allwinner recovery procedure
* removed driver preinstallation procedure as it has some problems with some devices
* fixed root check option
* added auto launch of the TechKnow ToolKit on installation
* added various item k/26: scriptexe, takes a .SH file from files_to_sd and executes it!
* added changer_filesCONMOD.sh, a script to change configurations of WM8650s
* added v. MediaManager 1. Add Wireless Device
* added v. MediaManager 2. List online mediaplayers
* added v. MediaManager 3. Sync files_to_sd to all
* added v. MediaManager 4. Play file on mediaplayers
* added v. MediaManager 5. Stop file playback on all
* added v. MediaManager 6. EZ Video Syncmode
* added v. MediaManager 7. EZ Image Syncmode
* added v. MediaManager 8. EZ Audio Syncmode
* added v. MediaManager 9. Deploy APKs to all
* added v. MediaManager 10. Sync date and time
* added v. MediaManager 11. Erase all /sdcard
* added v. MediaManager H. Help
* removed preinstall drivers directory
* rewrote the CWM WRITE procedure for AllWinner
* updated the code to show techknows new domain: www.techknow.me instead of the old www.techknowforum.net
* added i. 13 show/dump device partition information
You can download previous Uberizer v1.7 from here.
download file now
Subscribe to:
Posts (Atom)