Showing posts with label recovery. Show all posts
Showing posts with label recovery. Show all posts
Wednesday, September 27, 2017
Guide How To Flash Install GApps via TWRP Recovery
Guide How To Flash Install GApps via TWRP Recovery
How to install Gapps via any TWRP recovery? many peoples are new in rooting and dont know how to flash gapps through custom recovery.In this guide, we will show you how to install/flash google gapps via twrp recovery with step by step guide.
Before starting we want you to know some basic requirements of install gapps via twrp recovery.
1.You must download right GApps pack.
download gapps for your custom roms from below link.
a.Download Google Apps For Android 6.0 Marshmallow.
b.Download Google Apps For Android 7.0 Nougat.
c.Download Google Apps For Android 7.1 Nougat.
Before starting we want you to know some basic requirements of install gapps via twrp recovery.
1.You must download right GApps pack.
download gapps for your custom roms from below link.
a.Download Google Apps For Android 6.0 Marshmallow.
b.Download Google Apps For Android 7.0 Nougat.
c.Download Google Apps For Android 7.1 Nougat.
2.You must have twrp recovery installed.
3.Now connect your device to PC and transfer the Gapps pack to the internal memory of your device.
see also:How To Install Lineage Os ROM On Any Android Device [2 Methods]
1.Boot your device into TWRP recovery mode.
(In Samsung phones, where you will have to hold �Power + Home + Volume Up� and for most of the phones it is Power + Vol.Up button).
2.From TWRP Recovery menu, tap on �Install� and select the Gapp.Zip file that you have copied in your internal memory.
3.After selecting the gapps.zip file, do �Swipe to Confirm Flash� in the bottom of the screen to begin the Google Apps installation process.
4.This may take some time to install gapps on your device.
5.Now return to the TWRP main menu and tap the �Wipe cache/Dalvik� button TWRP�s �Wipe cache/Dalvik� button.
6.Once above steps are done you just need to reboot your device just go twrp main menu and reboot your device.
.
If you have any question or suggestion regarding this article, feel free to leave that in the comment section below
3.Now connect your device to PC and transfer the Gapps pack to the internal memory of your device.
see also:How To Install Lineage Os ROM On Any Android Device [2 Methods]
How to install Gapps via TWRP recovery.
1.Boot your device into TWRP recovery mode.
(In Samsung phones, where you will have to hold �Power + Home + Volume Up� and for most of the phones it is Power + Vol.Up button).
2.From TWRP Recovery menu, tap on �Install� and select the Gapp.Zip file that you have copied in your internal memory.
3.After selecting the gapps.zip file, do �Swipe to Confirm Flash� in the bottom of the screen to begin the Google Apps installation process.
4.This may take some time to install gapps on your device.
5.Now return to the TWRP main menu and tap the �Wipe cache/Dalvik� button TWRP�s �Wipe cache/Dalvik� button.
6.Once above steps are done you just need to reboot your device just go twrp main menu and reboot your device.
.
If you have any question or suggestion regarding this article, feel free to leave that in the comment section below
download file now
Tuesday, September 26, 2017
SYMPHONY V32 Flash File 5 1 RS615S V2 0 V17 0 Dead Set Recovery File 100 OK
SYMPHONY V32 Flash File 5 1 RS615S V2 0 V17 0 Dead Set Recovery File 100 OK
SYMPHONY V32 Flash File_5.1_RS615S_V2.0_V17.0 Dead Set Recovery File 100% OK
SYMPHONY V32 Flash file
SYMPHONY V32 Firmware
V32 Firmware
V32 Flash file
SYMPHONY V32_5.1_RS615S_V32_V17.0 Flash file
Monkey Virus Problem,Pattern Lock Problem,Privacy Lock Problem Solution,
Privacy Protection,Data Auto Open,
Auto Application download,
Hang On Logo Problem Solve Firmware Write Restart Problem Solve In Firmware
Update
Privacy Protection,Data Auto Open,
Auto Application download,
Hang On Logo Problem Solve Firmware Write Restart Problem Solve In Firmware
Update
SYMPHONY V32 Official Firmware 100% Tested Flash File Download Link
SYMPHONY V32 Flash file
SYMPHONY V32 FlashFile100% Working Tested
This Flash File Death Phone, Hang Logo, LCD Blank.
SYMPHONY V32 FlashFile100% Working Tested
This Flash File Death Phone, Hang Logo, LCD Blank.
SYMPHONY V32_5.1_RS615S_V32_V17.0 Flash file
Install ROM:
Install with SP Flash Tool / SPD Upgrade Tool / Miracle / Cm2 / Others Tools
[ Mobile Flash Video Tutorial - SP Tools / SPD ]
1). Turn off the smartphone. Cable is not connected to the computer.
2). Remove the battery and insert it again
3). Connect your phone to a computer cable. The operating system detects a new device
4). Disconnect the cable from the computer.
5). Run SPMultiPortFlashDownloadProject.exe
6). Choose File> Open File Agent download and specify the file MTK_AllInOneDA.bin (it is in the folder SP_MDT).
7). Click Scatter File and select the _Android_scatter.txt file (its in the folder with the rom).
8). Click "Start all".
9). Connect your phone to a computer cable. The program should see and blink. If the phone is not detected, then unplug it from the computer,
remove and insert the battery (if the battery is removable) and reconnect it to the computer.
10). After (OK) click Stop and disable any phone.
11). Completed.
2). Remove the battery and insert it again
3). Connect your phone to a computer cable. The operating system detects a new device
4). Disconnect the cable from the computer.
5). Run SPMultiPortFlashDownloadProject.exe
6). Choose File> Open File Agent download and specify the file MTK_AllInOneDA.bin (it is in the folder SP_MDT).
7). Click Scatter File and select the _Android_scatter.txt file (its in the folder with the rom).
8). Click "Start all".
9). Connect your phone to a computer cable. The program should see and blink. If the phone is not detected, then unplug it from the computer,
remove and insert the battery (if the battery is removable) and reconnect it to the computer.
10). After (OK) click Stop and disable any phone.
11). Completed.
download file now
Tuesday, September 19, 2017
Download Mini Militia Recovery Mod by ARSHAD
Download Mini Militia Recovery Mod by ARSHAD
Mini Militia Recovery MOD
Features :-
� Respawing in 0 seconds
� Pro pack Unlock
� Unlimited Boost
�Unlimited Bomb
� 9 bullets per shot
� Unlimited Ammo
� No Reload
� No one can see u in Solo Play mod
� Moded Guns
� New music
� 3 cool new maps
� You can see around the BUSH
� You can see other players Life
Click below button for Download
Features :-
� Respawing in 0 seconds
� Pro pack Unlock
� Unlimited Boost
�Unlimited Bomb
� 9 bullets per shot
� Unlimited Ammo
� No Reload
� No one can see u in Solo Play mod
� Moded Guns
� New music
� 3 cool new maps
� You can see around the BUSH
� You can see other players Life
Click below button for Download
download file now
Wednesday, September 13, 2017
Download Xiaomi MIUI Recovery Update Rom
Download Xiaomi MIUI Recovery Update Rom
Rename the downloaded ROM file to �update.zip� on the computer.
More Tutorial Here
download file now
Monday, September 11, 2017
Guide How To Flash a Custom ROM Custom Recovery Via Odin Updated
Guide How To Flash a Custom ROM Custom Recovery Via Odin Updated
Hey, guys welcome here and today we are going to tell you about that how to flash a custom rom via Odin and how to flash custom recovery via Odin in your Samsung smartphone. You can also flash stock firmware in Samsung devices via odin. Odin is the software which is made for Samsung devices only you can do all the things which are mention above in your Samsung smartphone. So without wasting the time lets get started to How To Flash a Custom ROM & Custom Recovery Via Odin.
Odin is a very useful Windows tool that lets you install stock firmware / flash Cuatom ROM on your Android device. Here is a step by step guide on how to use Odin to flash custom ROM on your Samsung smartphone
Be sure to backup your data including Contacts, SMS / MMS, APN & MMS Settings as well as photos and videos stored on your device�s internal or external storage.
Make sure that your device is well charged. Ideally, the battery level should be around 60-80%. The more the better.
USB Debugging should be enabled on your device.
Make sure that Samsung Kies is not running
1.Download Odin for Windows.
2.Custom ROM Zip
Note: We will not be responsible for any damage done to your device. Do it on your own risk.
First we are going to tell you about How To Flash Custom ROM via Odin in samsung devices.
Step 1: Download the official custom rom zip package for your device. Then extract the downloaded zip file. After extracting, you will either get one .tar / .tar.md5 file or will get multiple files.
If you get one file, it will have everything inside it: PDA + Phone + CSC.
If you get multiple files, there will be separate files for PDA, Phone & CSC.
Step 2: Download Odin3_v3.04.zip and extract the downloaded zip file. You will get following files:
1.Odin3 v3.04.exe
2.tmax.dll
3.zlib.dll
4.Odin3.ini
Step 4: Boot your device in download mode. For most Samsung devices, you will need to do this:
Switch your device off.
Press & hold Power + Home + Volume down buttons till you see a triangle and Android robot.
Now press the Volume up button to confirm entering the download mode.
Step 5: Once it is in download mode, connect your device to the computer via USB cable.
When your device is connected, one of Odin ID:COM boxes will turn yellow and display the COM port number
Step 6: If the rom zip package had just one file, click on PDA button, then browse and select the firmware file (.tar or .tar.md5).
If the firmware package had multiple files:
Click on PDA button, then browse and select the file that has CODE / PDA in its name.
Click on Phone button and select the file that has MODEM in its name.
Click on CSC button and select the file with CSC in its name.
Skip any files that you did not find in the package.
Make sure that you do not mess up with checkboxes:
Auto Reboot and F. Reset Time checkboxes should be selected
All other checkboxes should be unchecked.
After selecting the appropriate files, click on �Start� button in Odin.
This will kick off the process to flash the ROM. Please do not disconnect your device during the process. Once flashing is complete, your device will reboot. You can now disconnect from the PC and start using it. SO guys this is all about How To Flash Custom ROM via Odin in samsung devices.
That�s it. You can use these steps to flash custom ROM on your samsung device using Odin.
Now We are going to talk about How To Flash/Install Custom Recovery via Odin in Samsung devices
How To Flash/Install Custom Recovery via Odin
Custom recovery developed and maintained by the folks over at TeamWin. Using TWRP, you can take full device (nandroid) backups, plus install/flash rooting scripts like SuperSU, Custom ROMs/MODs and other similar stuff. TWRP recovery is available as both official and unofficial builds.
Step 1: Unzip the file and run/open Odin.exe file from the extracted files on your PC.
Make sure you�ve downloaded a Odin flashable TWRP recovery .tar file compatible for your device.
(If applicable) Enable OEM unlock:
Go to Settings � About phone � and tap Build number seven times to enable Developer options.
Step 2: Go back to main Settings page, scroll to bottom and select Developer options from there.
Step 3: Under Developer options, look for Enable OEM unlock checkbox/toggle and enable it.
Boot your device into Download mode:
Switch off your device.
Press and hold �Home + Power + Volume down� buttons for a few seconds until you see a warning screen.
Press Volume Up on the warning screen to accept it and boot into Download mode.
Step 4: Once your device is in download mode, connect it to the PC with a USB cable. The Odin window on PC should detect the device and show an �Added!!� message.
Step 5: Now click on the AP tab on Odin window and select the TWRP recovery .tar file that you downloaded for your device.
Note: DON�T play with any other options on the screen. You�re only required to connect your device and select the TWRP recovery .tar file in the AP tab.
Step 6: Click the Start button on Odin and wait for it to finish the process. Once it has finished successfully, you�ll see a pass message on the Odin screen.
Your device will automatically reboot when Odin is done flashing. You can then disconnect your device.
So guys this is all about How To Flash a Custom ROM & Custom Recovery Via Odin follow the steps carefully and if you need any help just comment below we will reply you asap. Keep visiting <3
Odin is a very useful Windows tool that lets you install stock firmware / flash Cuatom ROM on your Android device. Here is a step by step guide on how to use Odin to flash custom ROM on your Samsung smartphone
Before You Start
Install USB drivers for your device on your PC. You can download and install Samsung Kies which will automatically install device drivers.Be sure to backup your data including Contacts, SMS / MMS, APN & MMS Settings as well as photos and videos stored on your device�s internal or external storage.
Make sure that your device is well charged. Ideally, the battery level should be around 60-80%. The more the better.
USB Debugging should be enabled on your device.
Make sure that Samsung Kies is not running
1.Download Odin for Windows.2.Custom ROM Zip
Note: We will not be responsible for any damage done to your device. Do it on your own risk.
How To Flash a Custom ROM & Custom Recovery Via Odin
First we are going to tell you about How To Flash Custom ROM via Odin in samsung devices.
Step 1: Download the official custom rom zip package for your device. Then extract the downloaded zip file. After extracting, you will either get one .tar / .tar.md5 file or will get multiple files.
If you get one file, it will have everything inside it: PDA + Phone + CSC.
If you get multiple files, there will be separate files for PDA, Phone & CSC.
Step 2: Download Odin3_v3.04.zip and extract the downloaded zip file. You will get following files:
1.Odin3 v3.04.exe
2.tmax.dll
3.zlib.dll
4.Odin3.ini
Step 4: Boot your device in download mode. For most Samsung devices, you will need to do this:
Switch your device off.
Press & hold Power + Home + Volume down buttons till you see a triangle and Android robot.
Now press the Volume up button to confirm entering the download mode.
Step 5: Once it is in download mode, connect your device to the computer via USB cable.
When your device is connected, one of Odin ID:COM boxes will turn yellow and display the COM port number
Step 6: If the rom zip package had just one file, click on PDA button, then browse and select the firmware file (.tar or .tar.md5).
If the firmware package had multiple files:
Click on PDA button, then browse and select the file that has CODE / PDA in its name.
Click on Phone button and select the file that has MODEM in its name.
Click on CSC button and select the file with CSC in its name.
Skip any files that you did not find in the package.
Make sure that you do not mess up with checkboxes:
Auto Reboot and F. Reset Time checkboxes should be selected
All other checkboxes should be unchecked.
After selecting the appropriate files, click on �Start� button in Odin.
This will kick off the process to flash the ROM. Please do not disconnect your device during the process. Once flashing is complete, your device will reboot. You can now disconnect from the PC and start using it. SO guys this is all about How To Flash Custom ROM via Odin in samsung devices.
That�s it. You can use these steps to flash custom ROM on your samsung device using Odin.
Now We are going to talk about How To Flash/Install Custom Recovery via Odin in Samsung devices
How To Flash/Install Custom Recovery via Odin
Custom recovery developed and maintained by the folks over at TeamWin. Using TWRP, you can take full device (nandroid) backups, plus install/flash rooting scripts like SuperSU, Custom ROMs/MODs and other similar stuff. TWRP recovery is available as both official and unofficial builds.
Step 1: Unzip the file and run/open Odin.exe file from the extracted files on your PC.
Make sure you�ve downloaded a Odin flashable TWRP recovery .tar file compatible for your device.
(If applicable) Enable OEM unlock:
Go to Settings � About phone � and tap Build number seven times to enable Developer options.
Step 2: Go back to main Settings page, scroll to bottom and select Developer options from there.
Step 3: Under Developer options, look for Enable OEM unlock checkbox/toggle and enable it.
Boot your device into Download mode:
Switch off your device.
Press and hold �Home + Power + Volume down� buttons for a few seconds until you see a warning screen.
Press Volume Up on the warning screen to accept it and boot into Download mode.
Step 4: Once your device is in download mode, connect it to the PC with a USB cable. The Odin window on PC should detect the device and show an �Added!!� message.
Step 5: Now click on the AP tab on Odin window and select the TWRP recovery .tar file that you downloaded for your device.
Note: DON�T play with any other options on the screen. You�re only required to connect your device and select the TWRP recovery .tar file in the AP tab.
Step 6: Click the Start button on Odin and wait for it to finish the process. Once it has finished successfully, you�ll see a pass message on the Odin screen.
Your device will automatically reboot when Odin is done flashing. You can then disconnect your device.
So guys this is all about How To Flash a Custom ROM & Custom Recovery Via Odin follow the steps carefully and if you need any help just comment below we will reply you asap. Keep visiting <3
download file now
Enter Recovery Mode Any Chaina Android Phone Just Using Shift Mode By Volcano Box
Enter Recovery Mode Any Chaina Android Phone Just Using Shift Mode By Volcano Box
Enter Recovery Mode Using Shift Mode By Volcano
Just Enter Factory Mode any Spd or MTK Android
Connect USB Cable
Phone will Connect via ADB
Run Volcano & Go ADB Mode
Now Phone Come on Recovery Mode
Just Enter Factory Mode any Spd or MTK Android
Connect USB Cable
Phone will Connect via ADB
Run Volcano & Go ADB Mode
Now Phone Come on Recovery Mode
download file now
Sunday, September 10, 2017
Evercross A7s Root Dan Install CWM Recovery Tanpa PC
Evercross A7s Root Dan Install CWM Recovery Tanpa PC
Tutorial cara Nge-root dan install CWM Recovery ( ClockWorkMod Recovery ) di handphone Evercross A7s. Tutorial ini work juga untuk Evercros A7s* bintang. Untuk install recovery img untuk evercross sebaiknya hp dalam kondisi sudah di root. Apa bila kondisi Hp belum di root simak step by step cara root evercross.
 |
| kingroot + Mobileuncle Mtk Tools |
Cara Root Evercross A7s
Cara root evas A7s disini tanpa menggunakan PC/ Laptop. Jadi root dengan menggunakan aplikasi pihak ketiga. Sebenarnya bisa saja hp di root dengan menggunakan aplikasi Framaroot namun kecil kemungkinan bisa sukses handphone 100% telah ter-root.Admin sangat merekomendasikan root dengan KingRoot. Tetapi untuk cara root dengan menggunakan Kingroot kita memerlukan jaringan internet. Jadi sebelum anda memulai sebaiknya pastikan handphone anda mempunyai paket data.
Yang belum punya Kingroot silahkan download aplikasinya Download KingRoot v5.0.2
Cara Root: Install kingroot 5.0.2 ektensi APK ( Android Application Package ) yang anda download tadi. Apabila saat install kingroot ada notifikasi "Installation Blocked" Klik saja pada "More Detail" "Install Anyway (unsave) lalu klik OK".
Setelah terinstall aplikasi akan mulai search detections hp anda, bila belum dalam kondisi root didalam lingkaran akan tertulis "Root Access Unavailable" "root strategy available, just try it" lalu anda klik saja tombol Try To Root. Proses root pun akan berjalan dan biarkan berjalan sampai mencapai 100%. Apabila dalam proses root hp anda reboot dengan sendirinya maka biarkan saja. Its Ok.
Cara Pasang CWM Recovery Evercross A7s
Untuk memasang CWM silahkan anda download dahulu file nya di link berikut Download CWM Recovery For Evercross A7sSetelah anda download taruh Recovery.img di SDcard taruh di Root Sdcard jangan di dalam folder.
Pasang CWM recovery tanpa menggunakan PC / laptop. Cara pasang cwm dengan sebuah aplikasi android yang bernama MobileUncle MTK tools. Silahkan download dahulu Apk nya pada link dibawah ini
Download MobileUncle MTK tools
Setelah anda download Mobile uncle silahakan anda install pada hp android anda. Buka aplikasi mobile uncle >> Pilih Update Recovery >> Klik Recovery.img yang terdetect Di SDcard Anda >> Ada Perintah Are Sure Flash Recovery ! pilih saja oke >> ada perintah lagi Reboot into recovery Mode pilih Ok lagi. Dan hp anda akan reboot ke dalam recovery yang baru.
Evercross A7s anda sudah mempunyai CWM recovery dan anda bisa pasang costom rom evercross A7s yang bertebaran di internet.
download file now
Sunday, September 3, 2017
Getting into and exiting Recovery and Download Mode on the Samsung Galaxy S8 S8
Getting into and exiting Recovery and Download Mode on the Samsung Galaxy S8 S8
Just a few notes on getting into the various boot modes on the Samsung Galaxy S8 and S8+.
Recovery Mode
From Power Off:
1. Hold down the Volume Up and Bixby buttons
2. Press the Power button until the device turns on
3. Keep Volume Up and Bixby held down until the blue "Installing System Update" screen is displayed
After checking for an update, we will get into the Android Recovery mode.
Use the Volume Up & Down buttons to move up or down the list (or scroll on the display) and use Power to select.
Download Mode
From Power Off:
1. Hold down the Volume Down and Bixby buttons
2. Press the Power button until the device turns on
Once powered on, we need to press Volume Up to continue into Download Mode.
2. Press the Power button until the device turns on
Once powered on, we need to press Volume Up to continue into Download Mode.
To power the device off, hold down Volume Down, Bixby and the Power button for around 6 seconds. This will enter Recovery mode, from which we can reboot or power off.
download file now
Subscribe to:
Posts (Atom)